How much floor stripper do I need?

Typically 80-120 ml per m² per coat of polish being removed. Vinyl floors use about 100 ml/m², while terrazzo needs less at about 80 ml/m². Always apply stripper neat or at the manufacturer's recommended dilution for stripping.

How many coats of seal should I apply?

For most commercial floors, 3-4 coats of seal provide good protection. High-traffic areas may benefit from 5 coats. Each coat should be thin and even — thick coats take longer to dry and may not cure properly.

Do I need to neutralise after stripping?

Yes, always neutralise after stripping. Residual alkaline stripper will prevent seal from bonding properly, causing peeling and poor finish. Use a dedicated neutraliser or clean water rinse depending on the product used.

How long does floor stripping take?

Allow approximately 40 m² per hour for stripping (per coat) and 60 m² per hour for sealing. A 200 m² floor with 3 coats to strip and 3 new coats typically takes a full day including drying time between seal coats.

Black pads for stripping (aggressive), red or white pads for polishing/buffing. Stripping pads last about 200 m² before needing replacement. Budget for enough pads to complete the job without losing effectiveness.

CleanCalcs

Floor Stripping Calculator — Stripping & Sealing Materials

Calculate stripping, neutralising, and sealing materials for commercial floor maintenance.

Floor Area

Total floor area to be cleaned

Floor Type

Floor type

Coats to Remove

Coats to remove

New Coats to Apply

New coats to apply

How We Calculate This

The calculator estimates materials based on floor area and number of coats:

Stripper: ~100 ml/m² per coat (adjusted by floor type)
Neutraliser: ~50 ml/m² (one pass after stripping)
Seal/polish: ~80 ml/m² per coat (60 ml for terrazzo)
Pads: Stripping pads last ~200 m², polishing pads ~500 m²

Frequently Asked Questions

Related Calculators

Office Cleaning Time Calculator

Estimate cleaning time for offices based on floor area and task list.

Floor Area Coverage Calculator

Calculate how much floor area a cleaner can cover per hour by cleaning method.

Staff Required Calculator

Work out how many cleaning staff are needed for a building based on area and frequency.

Equipment Cost Calculator

Calculate total equipment costs for setting up a commercial cleaning operation.

Chemical Dilution Calculator

Work out the correct water-to-chemical ratio for any dilution rate.

Last updated: March 2026

All calculations are estimates. Always verify quantities and timings for your specific situation.